|
Southern Pacific Railroad's MC-2 class of steam locomotives was the first class to be ordered by and built for Southern Pacific (SP) as cab forward locomotives. They were built in 1909 following the design of SP's MC-1 class built earlier that year. The success of this locomotive model led to the design and introduction of the AC class of 4-8-8-2 cab forward locomotives in the 1930s and 1940s. In order to get the fuel oil from the tender to the opposite end of the locomotive where the firebox sat, SP had to pressurize the oil in the tender. of air pressure was sufficient to get the oil to the fire. The two MC-1 locomotives built in May 1909 were rebuilt in 1923 as MC-2 class with uniform cylinders measuring diameter × stroke; these rebuilt locomotives weighed , like the as-built MC-2 class, but with on the drivers. Most of the rest of the MC-2 class were "simpled" to the same size cylinders by 1931. Except for numbers 4011 and 4013 which were both scrapped by 1936, all of the MC-2 and the two former MC-1 locomotives were rebuilt again into class AC-1 with a higher boiler pressure, but a lower overall tractive effort. The MC-2 rebuilds included installation of a new 4¼-BL Worthington feedwater heater as well. SP used these locomotives until after World War II, retiring and then scrapping them in 1947 and 1948. The last locomotive of this class was scrapped on April 12, 1949, at SP's Sacramento shops. == References == * * 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Southern Pacific class MC-2」の詳細全文を読む スポンサード リンク
|